基于6-羟基-2-吡啶基膦酸配体的铜配合物的合成、结构及磁性

在水热条件下, 以6-羟基-2-吡啶基膦酸为主配体, 4, 4'-联吡啶(bpy)及1, 2-二(4-吡啶基)乙烯(bpe)为桥联配体, 合成了2个铜膦酸配位聚合物[Cu₃(L)₂(bpy)₂(H₂O)₂]·2H₂O (1), [Cu₃(L)₂(bpy)₂(H₂O)₃]·2H₂O (2)。配合物1中, Cu²⁺离子由膦酸配体连接成一条链, 该链由bpy桥联成二维层, 层与层之间通过氢键作用构成三维结构。配合物2与配合物1是同构的, 桥联配体是bpe。磁性研究表明, 配合物1与2中铜离子之间存在反铁磁性耦合。     

PW11Cu/TiO2膜光催化剂的制备及可见光催化性能

以PW₁₁Cu为可见光活性组分,TiO₂为载体结构组分,采用溶胶-凝胶法制备了PW₁₁Cu/TiO₂复合膜可见光催化剂,并用UV-Vis DRS、IR、Raman、XRD、SEM、TEM等手段对催化剂的光吸收性质、化学组成、晶相、表面结构和形貌进行了表征,同时,以模型污染物RhB的可见光降解为探针评估了它的光催化活性,考察了膜处理温度、PW₁₁Cu含量和溶液酸性对催化活性的影响,最后,通过催化剂循环降解RhB试验评估了PW₁₁Cu/TiO₂膜的稳定性。实验结果表明,PW₁₁Cu/TiO₂膜对可见光有明显吸收,低温(100℃)处理的膜为无定形态,高温(500℃)处理的膜为多晶态;低温处理的膜具有较高的可见光催化活性,用于RhB的可见光催化降解,在中性条件下反应80 min,RhB的降解率为100%,TOC去除达32%(4 h);提高溶液酸性有利于催化剂活性的提高,在pH=2.5的条件下,达到100%的RhB降解仅需30 min。在本实验条件下,PW₁₁Cu的最佳剂量是3.0 g。经过10次循环降解RhB,催化剂的光催化活性仍保留约90%。     

Bioanalytical applications of isothermal nucleic acid amplification techniques

The most popular in vitro nucleic acid amplification techniques like polymerase chain reaction (PCR) including real-time PCR are costly and require thermocycling, rendering them unsuitable for uses at point-of-care. Highly efficient in vitro nucleic acid amplification techniques using simple, portable and low-cost instruments are crucial in disease diagnosis, mutation detection and biodefense. Toward this goal, isothermal amplification techniques that represent a group of attractive in vitro nucleic acid amplification techniques for bioanalysis have been developed. Unlike PCR where polymerases are easily deactivated by thermally labile constituents in a sample, some of the isothermal nucleic acid amplification techniques, such as helicase-dependent amplification and nucleic acid sequence-based amplification, enable the detection of bioanalytes with much simplified protocols and with minimal sample preparations since the entire amplification processes are performed isothermally. This review focuses on the isothermal nucleic acid amplification techniques and their applications in bioanalytical chemistry. Starting off from their amplification mechanisms and significant properties, the adoption of isothermal amplification techniques in bioanalytical chemistry and their future perspectives are discussed. Representative examples illustrating the performance and advantages of each isothermal amplification technique are discussed along with some discussion on the advantages and disadvantages of each technique.     

北五味子对糖尿病脑病大鼠脑中神经活性物质含量影响的在线微透析-高效液相色谱-串联质谱联用分析

采用在线微透析-高效液相色谱-串联质谱联用方法,测定了糖尿病脑病大鼠大脑海马区的8种脑递质的含量,从脑中神经活性物质的角度研究五味子改善学习记忆能力的作用机制.实验结果表明,经五味子治疗后,痴呆大鼠脑透析液中的谷氨酸(Glu)、丝氨酸(Ser)、多巴胺(DA)及5-羟色胺(5-HT)的含量显著降低(P0.05),牛磺酸(Tau)及乙酰胆碱(Ach)的含量显著升高(P0.01),天冬氨酸(Asp)和γ-氨基丁酸(GABA)的含量有降低趋势(P0.05),8种神经活性物质的水平均向正常水平发生了调节.此结果说明五味子可能通过调节糖尿病大鼠大脑中神经活性物质的含量发挥保护中枢神经系统的作用,从而改善糖尿病脑病大鼠的学习记忆能力.Morris水迷宫实验结果表明,五味子水提物可以明显缩短糖尿病脑病大鼠的逃避潜伏期,增加穿越目标区域次数及中心区域(%)(P0.05).     

焙烧温度对K改性Ag-Fe/ZnO-ZrO2催化剂结构和CO加氢合成低碳混合醇醚性能的影响

采用并流共沉淀法在不同焙烧温度下制备K改性Ag-Fe/ZnO-ZrO₂催化剂,考察不同焙烧温度对催化剂CO加氢合成低碳混合醇醚反应性能的影响。通过N₂物理吸附(N₂-adsorption)、X射线衍射(XRD)、氢气程序升温还原(H₂-TPR)、一氧化碳程序升温脱附(CO-TPD)等手段对催化剂进行表征。结果表明,250 ℃焙烧的催化剂,由于焙烧温度较低,表面尚未形成足够多的活性位,未能达到最佳的催化性能;300 ℃焙烧的催化剂,其CO转化率最高、醇醚选择性较高,醇醚时空产率达到最大值。随着焙烧温度进一步升高,CO转化率逐渐降低,醇选择性先降低后增大,二甲醚(DME)选择性逐渐增大,醇醚时空产率逐渐降低。催化剂性能主要与其比表面积、还原性能、所含银铁复合物分散度及CO吸脱附性能有关,即比表面积较大、易于被还原、银铁复合物分散度较高以及较多的CO吸脱附活性位,有利于催化剂CO加氢转化。催化剂表面活性位对CO的非解离吸附强度降低,有利于醇醚产物的生成;而对CO的解离吸附强度增强,则不利于烃类产物的生成。     

A Ratiometric Luminescent Thermometer Co‐doped with Lanthanide and Transition Metals

Herein, we report the fabrication of a sensitive ratiometric and colorimetric luminescent thermometer with a wide operating‐temperature range, from cryogenic temperatures up to high temperatures, through the combination of lanthanide and transition metal complexes. Benefiting from the transition metal complex as a self‐reference, the lanthanide content in the mixed‐coordination complex, Eu_0.05(Mebip‐mim bromine)_0.15Zn_0.95(Mebip‐mim bromine)_1.9, was lowered to 5 %.     

A Mechanistic Switch in C-H Bond Activation by Elusive Fe\begin{document}$^\text{V}$\end{document}(O)(TAML) Reaction Intermediate: A Theoretical Study

The divergent behavior of C-H bond oxidations of aliphatic substrates compared to those of aromatic substrates shown in Gupta's experiment was mechanistically studied herein by means of density functional theory calculations. Our calculations reveal that such difference is caused by different reaction mechanisms between two kinds of substrates (the aliphatic cyclohexane, 2, 3-dimethylbutane and the aromatic toluene, ethylbenzene and cumene). For the aliphatic substrates, C-H oxidation by the oxidant Fe\begin{document}$^{\rm{V}}$\end{document}(O)(TAML) is a hydrogen atom transfer process; whereas for the aromatic substrates, C-H oxidation is a proton-coupled electron transfer (PCET) process with a proton transfer character on the transition state, that is, a proton-coupled electron transfer process holding a proton transfer-like transition state (PCET(PT)). This difference is caused by the strong \begin{document}$\pi$\end{document}-\begin{document}$\pi$\end{document} interactions between the tetra-anionic TAML ring and the phenyl ring of the aromatic substrates, which has a "pull" effect to make the electron transfer from substrates to the Fe=O moiety inefficient.     

熔盐法合成电化学性能优异的富锂层状正极材料Li_(1.5)Ni_(0.25)Mn_(0.75)O_(2.5)

采用氢氧化物共沉淀和熔盐法相结合的方法制备得到了电化学性能优异的富锂锰基Li_(1.5)Ni_(0.25)Mn_(0.75)O_(2.5)正极材料。借助X射线衍射(XRD)分析、扫描电镜(SEM)、感应耦合等离子体原子发射光谱(ICP-AES)、X射线光电子能谱(XPS)、电化学阻抗谱(EIS)和恒电流充放电测试等表征手段对材料的颗粒形貌、晶体结构和电化学性能进行了系统研究。XRD结果表明该材料具有完善的α-NaFeO2层状结构(空间群为R3m)和较低的Li~+/Ni~(2+)阳离子混排。电化学性能测试表明该材料的首次不可逆容量损失较小,且倍率性能和循环稳定性能十分优异。具体而言,在2.0~4.8V,0.1C时的首次不可逆容量损失为50mAh·g~(-1)(首次库伦效率84%);在10C时的放电比容量还能达到102mAh·g~(-1);在0.5C下循环100次后,放电比容量为205mAh·g~(-1)(容量保持率90%)。     

Recent advances in formaldehyde-responsive fluorescent probes

Formaldehyde is one of the simplest reactive carbonyl species. In view of the harmfulness of formaldehyde in nature and humans, it is of great signifi cance to further elucidate roles and functions of formaldehyde by a noninvasive detection approach. Fluorescent probes have become a popular tool to track and detect formaldehyde in vitro and in vivo, which have attracted more and more interest recently. This review focuses on various reaction mechanisms to design the fluorescent probes for detecting formaldehyde.     

渤海稠油及其组分中杂原子化合物的负离子电喷雾-高分辨质谱分析

采用沉淀法和色谱分离法将渤海某油田稠油分离成沥青质、胶质、剩余分3个组分。采用负离子电喷雾技术(ESI)结合高分辨傅立叶变换离子回旋共振质谱仪(FT-ICR MS)研究了该稠油及各组分的分子组成。结果表明,剩余分中有较少的极性杂原子化合物能被负离子ESI电离,如N_1,N_1O_1,O_1和O_2类,其等效双键数(DBE)较小。胶质和原油中极性化合物有相同的杂原子类型,包括N_1,N_1O_1,N_1O_2,N_2,N_2O_2S_1,O_1,O_2,其中胶质和原油中N_1,O_1,O_2类化合物的DBE-碳数分布图相似。沥青质中富集高缩合度且多杂原子的酸性化合物,如含杂原子N_,S的氧化程度高的化合物(N_2O_1,N_1O_3,S_1O_3)及O_3类化合物,这些物质具有较高的界面活性,易吸附在界面上促进界面张力降低和增强界面膜强度,从而有利于乳状液稳定存在。N_1O_1,N_1O_2,N_1O_3类化合物,N_2O_1类化合物可能分别是N_1化合物,N_2化合物的氧化降解产物;随着氧化降解程度增加,降解产物的极性明显增强。